API Service Category CK-4 describes oils for use in high-speed four-stroke cycle diesel engines designed to meet 2017 model year on-highway and Tier 4 non-road exhaust emission standards as well as for previous model year diesel engines. These oils are formulated for use in all applications with diesel fuels ranging in sulfur content up to 500 ppm (0.05% by weight). However, the use of these oils with greater than 15 ppm (0.0015% by weight) sulfur fuel may impact exhaust after treatment system durability and/or oil drain interval. These oils are especially effective at sustaining emission control system durability where particulate filters and other advanced after treatment systems
are used. API CK-4 oils are designed to provide enhanced protection against oil oxidation, viscosity loss due to shear, and oil aeration as well as protection against catalyst poisoning, particulate filter blocking, engine wear, piston deposits, degradation of low and high-temperature properties and soot-related viscosity increase. API CK-4 oils exceed the performance criteria of API CJ-4, CI-4 with CI-4 PLUS, CI-4 and CH-4 and can effectively lubricate engines calling for those
API Service Categories. When using CK-4 oil with higher than 15 ppm sulfur fuel, consult the engine manufacturer for service interval recommendations
5W30, 10W30, 15W40
Premium grade diesel engine oil that provides excellent protection
for newer, high performance engines that are used in the toughest
on-road and off-road applications. Shown to be versatile as well as able to meet the grueling demands of today’s low emission diesel engines, as well as the older models, which are using both low and high sulfur fuels.
SAE 15W40 SPECS:
Caterpillar ECF-1-A, ECF-2, ECF-3; MACK EON, EO-M Premium Plus, EO-O Premium Plus; CUMMINS CES 20077/20078/20081; Detroit Diesel DDC93K215/DDC93K218; DAIMLER CHRYSLER MB228.5 MB228.1 MB228; NAVISTAR INTERNATIONAL; FORD M2C171; VOLVO VDS-4,VDS-3, VDS-2
CI-4/SL multi-fleet engine oils are premium grade engine oils that provide excellent protection for newer, high performance engines. They are designed for use in mixed fuel fleets. For diesel applications requiring API CI-4 or older specifications as well as gasoline applications requiring API SL or older specifications.
5W30, 10W30, 10W40, 15W40, 20W50 CI-4/SL
Provides high quality engine protection under all driving conditions and is specifically formulated to provide extra protection against the harmful effects of city driving. Our low friction formula helps improve gas mileage, extend engine life and protect against rust, corrosion, start-up wear and varnish build-up. It also protects against thermal breakdown which helps prevent stuck rings.
SAE 30, 40, 50, 10W40, 15W40, 20W50, 25W50 and 25W60 CH4/SL
A limited selection of listed ABRO lubricants is available in ABRO’s Savannah Warehouse. Direct shipments from factory will require minimum quantities.
Please contact your ABRO sales representative to check for availability and minimum quantities before placing orders. ABRO’s representatives can also assist you to determine which lubricant is best for your market, including lubricants not listed in this catalog.
Copyright 2020. All Rights Reserved
Monday-Friday: 8am to 5pm